Application：
The car LED foot mat is an interior ambient light installed on the floor of the front and rear seats. It can be switched to different light colors and modes through the remote control. Its light is soft and uniform, which makes the car interior unique and elegant, and also allows passengers to see the environment inside the car clearly.
Specification:
- Voltage: 12V
- Current: less than 0.5A
- Light Color: red, green, blue, white, yellow, cyan, purple, orange
- Waterproof Rating: IP67
- Material: Japanese Acrylic + High brightness LED
- Interface type: Cigarette lighter interface
- Front seat foot pads size (Length * width): 38cm*24cm
- Rear seat foot pads size (Length * width): 38cm*26cm
Installation Step:
- Plug the cigarette lighter into the socket to connect to the power source. Then, test the switch, the working of per mat and the remote control.
- There is 3M double-sided tape on the back of the LED floor mat. After confirming the installation position of each mat, please tear off the film of 3M tape, and then attach the mat on the installation position!
Light Color and Mode:
These mats can adjust the light color and mode by remote control.
Light Color:
- Red, green, blue, white, yellow, cyan, purple, orange
Light Mode:
- Single light color (Continuously illuminate one color)
- 3 Colors jump mode (3 colors keep switching and blinking）
- 7 colors jump mode (7 colors keep switching and blinking）
- 3 colors breath mode (3 colors keep switching with fade in and out)
- 7 colors switch-over mode (Circulating between 7 colors)
- 4 Music Modes (4 different light colors and flashing modes, they will flash follow the music rhythm)
Maintenance:
Clean the floor mats regularly: LED floor mat is waterproof, anti-corrosion and scratch-resistant. You can clean the floor mat with water or a clean cloth, or you can use a vacuum cleaner to remove dust and debris from the floor mat.
