Feature:
Use Advanced Materials
The main material of the car emblem is cast acrylic. The high molecular weight makes it have excellent stiffness and good transparency, which makes the light transmission more uniform and beautiful. High quality LED lamp set, featuring high brightness and long service life. The lamp bead has vibration resistance and stable emitting light
Special Gift
led front grill emblems for Audi RS6 car front grille badge and rear logo. Light color collection is available in red, white, blue, ice blue, green, pink and multi-color ( controllable colors ). Bright colored badges make the car stand out from the crowd.
Hard wired car power supply
The Audi RS6 needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, you may need to drill holes to allow the wires to go through. If not, it may need to be drilled to allow the wires to go through.
Custom Audi Badge
We suggest that you note the size of your car emblem (maximum length and width) in the “note” box when placing an order. If the car badge is special, you can even take a picture of the car logo structure and send it to us. In order to achieve the best installation effect. After you purchase our Audi RS6 emblems, our customer service may contact you via email ( [email protected] ) or Messenger to confirm the shape and size of the logo. Please pay attention to your email after purchase. We appreciate your kind understanding and cooperation.
Specification:
Working Voltage: 12V
Material: Acrylic (PMMA)
Color Option:
Red, white, blue, Ice-blue, green, pink
Multi-color RF Remote Control:
red, green, blue, white, yellow, cyan, purple, orange. Stay on, flashing mode, breathing mode, Gradient mode, sound sensing mode.
Fit for RS6 1994-1997, RS6 1998-2004, RS6 2005-2011, RS6 2012-2018, RS6 2019-2023
Note:
1. LED car emblems are not compatible with car emblems with adaptive cruise sensors or radar sensors.
2. The led car badge needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, it may need to be drilled to allow the wires to go through.
How To Replace Car Emblems:
1. Put a towel next to the LOGO (to avoid scratches) and use a screwdriver to pry the old emblem off.
2. Clean the area (residual glue, double-sided tape or dust, etc.).
3. Route the power cord through the pilot hole in the badge mounting location and into the engine compartment.
4. Peel off the backing of the glowing car emblem, and stick the emblem to the car while pulling the wire, and press it tightly.
5. Connect the power cable from the emblem light to the daytime running light / battery / fuse box / headlights power supply etc. depending on your preference.
