Sale!

Audi RS5 Illuminated 4 Rings Badges

$99.00

-34%

999 in stock

Product total
Options total
Grand total
SKU: CB-AU-RS5 Categories: , Tag:

    Feature:

    Trendy Collocation
    The way to make your car more fashionable is to install our led emblem lights. Glow up the car emblem in red, white, blue, ice blue, green or pink. Enhance the outlook of your car, nice and shiny. Multi-color remote control can also adjust the light color of the car emblem at any time.

    Gift Anytime
    Aoonuauto’s Audi RS5 is the most popular and innovative LED products, these products are fun and great for display, a great gift choice for car lovers.

    Hard Wired Require
    The Audi RS5 needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, you may need to drill holes to allow the wires to go through. If not, it may need to be drilled to allow the wires to go through.

    Custom Audi Badge
    We suggest that you note the size of your car emblem (maximum length and width) in the “note” box when placing an order. If the car badge is special, you can even take a picture of the car logo structure and send it to us. In order to achieve the best installation effect. After you purchase our Audi RS5 emblems, our customer service may contact you via email ( [email protected] ) or Messenger to confirm the shape and size of the logo. Please pay attention to your email after purchase. We appreciate your kind understanding and cooperation.

    Specification:

    Working Voltage: 12V
    Material: Acrylic (PMMA)
    Color Option:
    Red, white, blue, Ice-blue, green, pink
    Multi-color RF Remote Control:
    red, green, blue, white, yellow, cyan, purple, orange. Stay on, flashing mode, breathing mode, Gradient mode, sound sensing mode.
    Fit for Audi RS5 2008-2012, RS5 2013-2017, RS5 2018-2023

    Note:

    1. LED car emblems are not compatible with car emblems with adaptive cruise sensors or radar sensors.
    2. The led car badge needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, it may need to be drilled to allow the wires to go through.

    How To Replace Car Emblems:

    1. Put a towel next to the LOGO (to avoid scratches) and use a screwdriver to pry the old emblem off.
    2. Clean the area (residual glue, double-sided tape or dust, etc.).
    3. Route the power cord through the pilot hole in the badge mounting location and into the engine compartment.
    4. Peel off the backing of the glowing car emblem, and stick the emblem to the car while pulling the wire, and press it tightly.
    5. Connect the power cable from the emblem light to the daytime running light / battery / fuse box / headlights power supply etc. depending on your preference.

    Additional information

    Weight 0.3 kg
    Car Maker

    Audi