In order to make the light color of the LED Volkswagen Golf car badge more full, we use high-quality LED light strips with high color rendering but energy saving, which is environmentally friendly and energy-saving. The main body is made of cast acrylic, which has excellent light transmission.
This Volkswagen Golf is part of the Aoonuauto LED light series for adults with a creative hobby. It’s a wonderful treat for yourself and an impressive gift for car tuning enthusiasts. Light color collection is available in red, white, blue, ice blue, green, pink and multi-color ( controllable colors ). Bright colored badges make the car stand out from the crowd.
Hard wired LED car emblem
Please make sure the badge has a place to run a wire to the 12V car power supply. Some vehicles will require a hole to be drilled to run the wire.
We suggest that you note the size of your car emblem (maximum length and width) in the “note” box when placing an order. If the car badge is special, you can even take a picture of the car logo structure and send it to us. In order to achieve the best installation effect. After you purchase our car badge light, our customer service may contact you via email ( [email protected] ) or Messenger to confirm the shape and size of the logo. Please pay attention to your email after purchase. We appreciate your kind understanding and cooperation.
Working Voltage: 12V
Material: Acrylic (PMMA)
Car Emblem For Volkswagen GOLF I (Mk1) 1974-1983, GOLF II (Mk2) 1984-1991, GOLF III (Mk3 ) 1992-1999, GOLF IV (Mk4) 1999-2006, GOLF V (Mk5) 2003-2009, GOLF VI (Mk6 ) 2009-2012, GOLF VII (Mk7) 2012-2019, GOLF VIII ( Mk8 ) 2020-2023, GOLF I Cabriolet 1979-1993, GOLF III Cabriolet 1993-1998, GOLF IV Cabriolet 1998-2002, GOLF VI Convertible 2011-2016, GOLF VII Van 2012-2022, GOLF VIII (Mk7) 2021-2022
Red, white, blue, Ice-blue, green, pink
Multi-color RF Remote Control: red, green, blue, white, yellow, cyan, purple, orange. Stay on, flashing mode, breathing mode, Gradient mode, sound sensing mode.
LED car emblem do not fit the car badge with adaptive cruise probes or radar probes.
1. LED car emblem do not fit the car badge with adaptive cruise probes or radar probes.
2. The led car badge needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, it may need to be drilled to allow the wires to go through.
How To Replace Car Emblems:
1. Put a towel next to the LOGO (to avoid scratches) and use a screwdriver to pry the old emblem off.
2. Clean the area (residual glue, double-sided tape or dust, etc.).
3. Route the power cord through the pilot hole in the badge mounting location and into the engine compartment.
4. Peel off the backing of the glowing car emblem, and stick the emblem to the car while pulling the wire, and press it tightly.
5. Connect the power cable from the emblem light to the daytime running light / battery / fuse box / headlights power supply etc. depending on your preference.