Best Car Emblem logo
Aoonuauto’s illuminated Toyota Logo Emblem is specially designed for auto modification. Logo with LED backlight, various colors for you to choose. Different color car LED LOGO give a sophisticated and unique look. Attractive luminous car badges will attract more eyes and compliments to your car. All of our car badge lights are made with huge passion and care for every single detail.
Fully resistant to rain, snow and sun. The LED Car Emblem features an extremely durable construction made of high quality Acrylic (PMMA) and is a direct replacement for your original Toyota bZ4X Emblem. The lighting can be connected to the 12V power supply.
Custom Toyota Emblem
We suggest that you note the size of your car emblem (maximum length and width) in the “note” box when placing an order. If the car badge is special, you can even take a picture of the car logo structure and send it to us. In order to achieve the best installation effect. After you purchase our Toyota bZ4X emblems, our customer service may contact you via email ( [email protected] ) or Messenger to confirm the shape and size of the logo. Please pay attention to your email after purchase. We appreciate your kind understanding and cooperation.
Working Voltage: 12V
Material: Acrylic (PMMA)
Red, white, blue, Ice-blue, green, pink
Multi-color RF Remote Control:
red, green, blue, white, yellow, cyan, purple, orange. Stay on, flashing mode, breathing mode, Gradient mode, sound sensing mode.
1. LED car emblem do not fit the car badge with adaptive cruise probes or radar probes.
2. The led car badge needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, it may need to be drilled to allow the wires to go through.
How To Replace Car Emblems:
1. Put a towel next to the LOGO (to avoid scratches) and use a screwdriver to pry the old emblem off.
2. Clean the area (residual glue, double-sided tape or dust, etc.).
3. Route the power cord through the pilot hole in the badge mounting location and into the engine compartment.
4. Peel off the backing of the glowing car emblem, and stick the emblem to the car while pulling the wire, and press it tightly.
5. Connect the power cable from the emblem light to the daytime running light / battery / fuse box / headlights power supply etc. depending on your preference.