Note: For more customization requirements or you are not sure the type of car, please contact our customer service ( [email protected] ), thank you!
Feature:
Dress up with ram 2500 door sill protector
LED scuff plate illuminated the logo on the door sills and light up the door entrance. The lights are clear and charming.
Protect the car door sill
The use of car door sill protector film can also reduce the scratching of the original door sill when entering and exiting the car.
Custom illuminated sill plates
We provide professional customized services. If you have special requirements, you can contact our customer service ([email protected]) for consultation. We can customize the shape, size and logo of the sill pedal for you. Even more custom products. Please feel free to contact us. To learn more about customized services, please click: LED Door Sill Customized Service.
Specification:
Voltage: 12V
Material: PMMA Acrylic + High brightness LED
Thickness: 0.4cm-0.5cm
Waterproof rating: IP67
Car door sill for Ram 2500 ( DJ ) 2010-2023
For more car models and colors (remote control), you can click here to view and place an order.
Ram Compatible Illuminated Door Sill Replacement (click it)
Ram Compatible Batteries Powered Door Sill Scuff Plate (click it)
Working Mode:
Vehicle Power Supply DC 12V, Handwired led door sill guard is usually wired to the positive and negative of the car’s door sensor. The illuminated car sill will light up when the door is opened and turn off when the door is closed.
Stay on: The light stays on after the door is opened.
Flash&flow: Not remote control. Flow mode, breathing mode, and flashing mode are automatically cycled after opening the door.
Colorful (auto-changing): No remote control, colorful flowing and flashing. The flowing mode, breathing mode, gradient mode, and flashing mode keep cycling after opening the door.
Installation guide:
1. Test if the led door sill is working properly.
2. Make sure the installation position and clean to make it dry.
3. Find out the positive and negative poles of the car door power wires and connect to the positive and negative poles of the door sill pan. (red wire connects to the positive and black wire connects to the negative.)
4. Peel off the 3M double-sided adhesive protective film on the back of the door sill pans and install the door sill pan to the correct position. Press to make it fit snugly.
5.Tidy up the wires and the installation are complete.
Attention:
1. AoonuAuto LED Door Sills are not the OEM part (not factory door sill). The LED door sills cover on the original car sill or door sill scuff plates.
2. The acrylic door sill pedals couldn’t cover the curved area of the door steps.
After Sales Services:
1. LED door sills are customized product. After starting its production, if there is no quality problem or defect manufacturer, it does not under the refund policy.
2. We provide 1-month replacement and 1-year warranty policy, which is not applicable to artificial damage and other subjective reason.
3. If you have any question, contact us please. (We will respond within 24 hours.)