Land Rover Compatible Battery Powered LED Door Sill Protectors



998 in stock

Product total
Options total
Grand total
Guaranteed Safe Checkout

    Note: For more customization requirements or you are not sure the type of car, please contact our customer service ( [email protected] ), thank you!


    Electromagnetic induction switch.
    The magnet is mounted under the car door and aim at control point on the led door sills. When you open the door, the Land Rover door sill panels will light up and display the name and logo of the vehicle (and the LED door sill panels will turn off as the door closed).

    Bring your vehicle a new look.
    The door sill is the place where often being stepped on, and it is easily scratched. Our LED door sill panels can well protect your car door sills and prevent scratching the car surface. It can also cover the existing scratches and repair the appearance of the car. Keep the car beautiful and clean as new.

    Convenient installation.
    Installing the door sill plate by yourself is also a simple thing, it will not cost you a lot of time. It does not require Hard-wiring. You only need to prepare enough AA batteries in advance. Some vehicles can install the LED door sillpedals to directly cover the factory door sill, and some need to remove the factory car door sill to install the LED door sill pedal. The specific installation method needs to be determined according to the actual situation of your vehicle.


    Power Supply Method: Powered by 4 AA Batteries
    Material: PMMA Acrylic + High brightness LED
    Waterproof Rating: IP67
    Thickness: 0.4cm-0.5cm
    Colors Mode: Red, Blue, White, Ice-blue, purple, Green, Pink

    Working mode:

    Powered by AA Battery, led door sill runs on batteries only, no wiring required. The switch is controlled by a small magnet. The light turns off when the magnet is close and turns on when it moves away. The magnet is installed at the bottom of the door, corresponding to the magnet sensing area of the door sill plate below. There is also a power switch on the battery box.

    stay on” means the lights stay on when the door is opened and nothing else changes.

    flash&flow” The battery powered version will light up when the door is opened, and then automatically turn off after displaying all lighting modes in two cycles (the LED door sill panels also turn off as the door closed). It will light up again as the door open. Generally, it keeps light up for about 1 minute. The duration of the light is proportional to the length of the door sill pedal. The longer the door sill pedal, the longer the light could stay on.

    Customization Steps:

    1. Any words, text, pattern, image; e.g., your name, store logo, company logo, carton logo, model words, etc. can be customized.
    2. When placing an order, please select “”Customize Logo”” option and fill in your customized content in the “”Note”” box.
    3. After placing the order, please contact us via Email: [email protected] or Messenger with the order number & customized requirements, and our customer service will make a second confirmation with you (usually within one working day).
    4. After you confirm, your order will enter production, and the production will be completed and shipped within 1-2 working days.
    To learn more about customized services, please click: LED Door Sill Customized Service.

    Installation Step:

    1. Get the AA batteries ready then put them into the battery box to check the work of led door sill.
    2. Tear off the 3M tape on the back of the door sill pedal, and attach the door sill pedal to the install location.
    3. Be aware there’s a small magnet that comes with the battery door sills, which need to attach to the bottom of the door, aiming at control point on the led door sills. Suggesting to identify the control point before installation.
    4. Hide the battery box and wires.
    Note: Battery is not included in our product package. Each pedal needs 4 AA batteries for power supply. Please prepare the batteries by yourself.

    Installation Attention:

    1. AoonuAuto LED Door Sills are not the OEM part (not factory door sill). We just customize more car accessories for your vehicle to let it more attractive.
    2. The acrylic door sill pedals couldn’t cover the curved area of the door steps.

    After Sales Services:

    1. LED door sills are customized product. After starting its production, if there is no quality problem or defect manufacturer, it does not under the refund policy.
    2. We provide 1-month replacement and 1-year warranty policy, which is not applicable to artificial damage and other subjective reason.
    3. If you have any question, contact us please. (We will respond within 24 hours.)

    Additional information

    Weight 0.6 kg
    Car Maker

    Land Rover