Feature:
Trendy appearance
Glow up the BMW car emblem in red, white, blue, ice blue, green or pink. Enhance the outlook of your car, nice and shiny. Multi-color remote control can also adjust the light color of the car emblem at any time. When it works, your car will stand out in traffic.
Excellent quality
BMW X7 emblem is used to upgrade and replace the OEM logo. It is made of cast acrylic. Cast acrylic has good stiffness and transparency, ensuring high transparency and uniform brightness. High quality LED beads have durable and non-fading bright light beams. The BMW emblem lights are fixed with 3M glue with excellent viscosity, which is stable and durable.
Hard wired LED car badge
The LED BMW badge needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, you may need to drill holes to allow the wires to go through.
Customized car emblem
We suggest that you note the size of your car emblem (maximum length and width) in the “note” box when placing an order. If the car badge is special, you can even take a picture of the car logo structure and send it to us. In order to achieve the best installation effect. After you purchase our BMW emblem light, our customer service may contact you via email ( [email protected] ) or Messenger to confirm the shape and size of the logo. Please pay attention to your email after purchase. We appreciate your kind understanding and cooperation.
Specification:
Working Voltage: 12V
Material: Acrylic (PMMA)
Color Option:
Red, white, blue, Ice-blue, green, pink
Multi-color RF Remote Control: red, green, blue, white, yellow, cyan, purple, orange. Stay on, flashing mode, breathing mode, Gradient mode, sound sensing mode.
Note:
1. LED car emblems are not compatible with car emblems with adaptive cruise sensors or radar sensors.
2. The led car badge needs to be connected to the car power supply. Before purchasing, please make sure that your car emblem has a proper place to pass through the wire to connect to the power supply. If not, it may need to be drilled to allow the wires to go through.
How To Replace Car Emblems:
1. Put a towel next to the LOGO (to avoid scratches) and use a screwdriver to pry the old emblem off.
2. Clean the area (residual glue, double-sided tape or dust, etc.).
3. Route the power cord through the pilot hole in the badge mounting location and into the engine compartment.
4. Peel off the backing of the glowing car emblem, and stick the emblem to the car while pulling the wire, and press it tightly.
5. Connect the power cable from the emblem light to the daytime running light / battery / fuse box / headlights power supply etc. depending on your preference.
