New upgrade LED light strip
Unconventional fiber optic guide strip. It has built-in LED beads throughout the light strip, with 100 LED light beads per meter, which is more uniform, bright and stable than common fiber optic light strips!
Multi-color remote control
LED car ambient light have 8 light colors ( orange, red, green, cyan, blue, purple, yellow, white ) and 3 light modes ( breathing, flashing and gradient mode ). We can control the light through a remote control. In the multi-color gradient and multi-color flashing modes, the light bars are jumping in different colors.
The car interior light strip from the tail end, every 10mm distance can be cut, you can cut the light bar to the length you want according to this rule.
Light up car interior silhouette
The car interior light strip is easy to install. It only needs to be tucked into the gap of the car dashboard, center control, and door. When the light is turned off, it is almost invisible and does not affect the appearance. After turned on it, it decorates the outline of your car’s interior, full of technology.
Working Voltage: 12V
Connect the power supply: wiring
2PCS*740mm: 2 control boxes + 2 light strips (For two doors)
3PCS(2PCS*740mm + 1PC*1100mm): 2 control boxes + 2 light strips (For two doors)
4PCS*740mm: 4 control boxes + 4 light strips (For four doors)
5PCS(4PCS*740mm + 1PC*1100mm): 5 control boxes + 5 light strips (For four doors and dashboard)
6PCS*740mm: 6 control boxes + 6 light strips (For four doors and dashboard)
7PCS(6PCS*740mm + 1PC*1100mm): 6 control boxes + 6 light strips (For four doors and dashboard)
1. For more length customization, you can contact our customer service for communication.
TIPS: Our ambient light strips are installed in the gap of the door and dashboard. If there is a gap in the interior of your car, a bank card can get stuck. Then it is suitable to install our ambient light strip. If the bank card does not go in, it is not recommended to buy. If the bank card is loose after entering, you can find a way to put something to get stuck.
1. Determine the installation position. Determine the number and length of the required LED Fiber Optic light strips. Purchase Fiber Optic light strips according to your installation plan.
2. According to the position of the wiring, fix the light strips at the installation position. Light strips that are too long can be trimmed.
3. Connect the positive and negative wires of each light strips to the positive and negative wires of the car power supply (12V). Just connect the light strip wires to the 12V power wires that is powered on after the car starts.
After Sales Services:
1. AoonuAuto is now focusing on more car lighting accessories and devote to providing the unique experience of car traveling. Your satisfaction is our utmost concern.
2. If you find any problem, contact us, our customer service team will give valuable service to you.