Audi LED Door Sill Protectors - Battery Powered

Specification:

Logo: Your car brand name
Fitted for the car front doors and rear doors
Voltage: 12V
Current: less than 0.5A
Available colors: red, yellow, blue, white, green, rose red, colorful
Waterproof rating: IP67
Material: Acrylic (PMMA) and High brightness LED
Thickness: 0.4cm - 0.5cm

Customization Steps:

1. If you have any special requirement (such as size/ logo/style/ car model and year).
note: We make the product with the exact size based on your car model and year
2. Please contact our customer service for consultation.
3. After confirmation, we will arrange your production and ship the product to you.

Feature:

Door Sills Look: Our LED Door Sills provide good lighting guidelines for entering your car. When you open the door, the door sill pan lights up and displays the vehicle's name and logo it helps to get in and out of the car more easily in dark areas. They close automatically when the door is closed. Bring a new, elegant look to your car.

Protection of car's door sills: If you are looking to cover up the scuffs and scratches of your car, these LED door sill entry guards will serve you and your car well.

Quality Acrylic: Manufactured by Acrylic and high brightness LED, waterproof, anti-corrosion, resists wear and tear. The bright led beads give you enough light to get in and out of the vehicle in the darkness also improving the safety factor.

Installation Process:

All brand Car models have different shape and size door sills which have different way to install. There are 3M double-sided tapes on the back of the door sill trim. In some of the car models the original door sills can be directly covered by the LED door sill plates and some other models need to consider whether it will affect the car doors' opening and closing. Wiring is required for the installation of the door sill guards.

Steps of Batteries Powered Installation:

1. Prepare three AA battery, and then test if the LED door sill is working properly.
2. Determine the installation position. Clean the installation position and dry it.
3. Peel off the 3M double-sided adhesive protective film on the back of the door sill pan and install the door sill pan to the correct position. Press to make it fit snugly.
4. Find and test the position of the LED door plates(usually in the middle of the led door sill) that can sense and control the light switch by the small electromagnetic patch, and then stick the small electromagnetic patch on the corresponding position(bottom of the car door). Test whether the LED door sill automatically turns off when the door is closed. If it succeeds, the installation is correct.
5. Hide the power box and wires. The installation is complete.

Note:

1. AoonuAuto LED door sills are not OEM door sills (not factory door sill ). We just customize more car accessories for your vehicle to make it more attractive.
2. We design door sill pedals according to your car model, and strive to achieve the most suitable display effect, but the size may not be exactly the same as the factory door sills. The acrylic door sill pedals couldn't cover the curved area on the door steps.
3. For year's ealier than 1985, you need to contact our customer service to provide the door sill size of your car, so that we can customize the most suitable door sill for your car.

After Sales Services:

1.If there is not a quality problem or a manufacturer's problem, it does not comes under refund policy so please confirm the specific model, size and logo style before placing the order.
2. We provide 1-month replacement and 1-year warranty policy, which is not applicable to human damage and other subjective factors.
3. If you find any problem, contact us, our customer service team will give valuable service to you.